English
Single acting piston seal with U-shaped cross-section. For double acting pistons, two seals are used ”back to back”. Special lip design for pneumatic application to maintain lubricating film and minimize friction. Suitable for cylinders with pneumatic cushioning.
Pneumatic -Piston Seal-:
Ring Diameter Outside0 mm
TSS Article Number (3 to 9)DE00320
Signature StandardAPDE00320-WU9E1
Type of Article0
Quality (10th Digit)-
Root Groove Inside Diameter24 mm
Ring Diameter Inside0 mm
Root Groove Thickness3.5 mm
Root Groove Outside Diameter32 mm
Compound codeWU9E1
Groove Diameter Inside24 mm
Groove Diameter Outside32 mm
Groove Width3.5 mm
Groove Thickness0 mm
Article GroupAP
Ring Thickness0 mm
Ring Width0 mm
Material Information for the product(s) on this page
WU9E1
WU9E1 Engineering Data Sheet_Ed1_rev0
Material:
WU9E1
Maximum Temperature:
80
Color:
Grey
Hardness unit:
Shore A
Maximum Hardness:
91
Minimum Hardness:
91
Hardness Tolerance:
+/- 2
Shore A Hardness:
91+/- 2
Material Code Class:
Thermoplastic
Material Type:
PUR
Gravity Tolerance:
+/-0.02
Gravity Unit:
g/cm³
Minimum Temperature:
-40
Specific Gravity:
1.14