English
Type APDE - APDE00700-WU9E1
SAP Article number: 200000130407
Single acting piston seal with U-shaped cross-section. For double acting pistons, two seals are used ”back to back”. Special lip design for pneumatic application to maintain lubricating film and minimize friction. Suitable for cylinders with pneumatic cushioning.
Pneumatic -Piston Seal-:
SAP Article number200000130407
TSS Article Number (3 to 9)DE00700
Signature StandardAPDE00700-WU9E1
Quality (10th Digit)-
Compound codeWU9E1
Groove Diameter Inside58 mm
Groove Diameter Outside70 mm
Groove Width9.50 mm
Article GroupAP
Material Information for the product(s) on this page
WU9E1
WU9E1 Engineering Data Sheet_Ed1_rev0
Material:
WU9E1
Maximum Temperature:
80
Color:
Grey
Hardness unit:
Shore A
Maximum Hardness:
91
Minimum Hardness:
91
Hardness Tolerance:
+/- 2
Shore A Hardness:
91+/- 2
Material Code Class:
Thermoplastic
Material Type:
PUR
Gravity Tolerance:
+/-0.02
Gravity Unit:
g/cm³
Minimum Temperature:
-40
Specific Gravity:
1.14