English
Single acting piston seal with U-shaped cross-section. For double acting pistons, two seals are used ”back to back”. Special lip design for pneumatic application to maintain lubricating film and minimize friction. Suitable for cylinders with pneumatic cushioning.
Pneumatic -Piston Seal-:
TSS Article Number (3 to 9)DE10630
Signature StandardAPDE10630-WU9E1
Type of Article0
Quality (10th Digit)-
Root Groove Inside Diameter53 mm
Root Groove Outside Diameter63 mm
Compound codeWU9E1
Root Groove Width4.5 mm
Groove Diameter Inside53 mm
Groove Diameter Outside63 mm
Groove Width4.5 mm
Article GroupAP
Material Information for the product(s) on this page
WU9E1
WU9E1 Engineering Data Sheet_Ed1_rev0
Material:
WU9E1
Maximum Temperature:
80
Color:
Grey
Hardness unit:
Shore A
Maximum Hardness:
91
Minimum Hardness:
91
Hardness Tolerance:
+/- 2
Shore A Hardness:
91+/- 2
Material Code Class:
Thermoplastic
Material Type:
PUR
Gravity Tolerance:
+/-0.02
Gravity Unit:
g/cm³
Minimum Temperature:
-40
Specific Gravity:
1.14