Type APDS - APDS00160-WU9E1
Single acting piston seal with U-shaped cross-section. For double acting pistons, two seals are used ”back to back”. Same design as APDE-type, but lower interference of the dynamic lip for reduced friction and break-off pressure. Recommended for return spring cylinders. Note: good guiding system required. Suitable for cylinders with pneumatic cushioning.
Pneumatic -Piston Seal-:
TSS Article Number (3 to 9)DS00160
Signature StandardAPDS00160-WU9E1
Type of Article0
Quality (10th Digit)-
Root Groove Inside Diameter10 mm
Root Groove Outside Diameter16 mm
Compound codeWU9E1
Root Groove Width3 mm
Groove Diameter Inside10 mm
Groove Diameter Outside16 mm
Groove Width3 mm
Article GroupAP

Material Information for the product(s) on this page
WU9E1
WU9E1 Engineering Data Sheet_Ed1_rev0
Material:
WU9E1
Maximum Temperature:
80
Color:
Grey
Hardness unit:
Shore A
Maximum Hardness:
91
Minimum Hardness:
91
Hardness Tolerance:
+/- 2
Shore A Hardness:
91+/- 2
Material Code Class:
Thermoplastic
Material Type:
PUR
Gravity Tolerance:
+/-0.02
Gravity Unit:
g/cm³
Minimum Temperature:
-40
Specific Gravity:
1.14