English
Type APDS - APDS00170TWU9E1
SAP Article number: 200000178900
Single acting piston seal with U-shaped cross-section. For double acting pistons, two seals are used ”back to back”. Same design as APDE-type, but lower interference of the dynamic lip for reduced friction and break-off pressure. Recommended for return spring cylinders. Note: good guiding system required. Suitable for cylinders with pneumatic cushioning.
Pneumatic -Piston Seal-:
SAP Article number200000178900
TSS Article Number (3 to 9)DS00170
Signature StandardAPDS00170TWU9E1
Quality (10th Digit)T
Compound codeWU9E1
Groove Diameter Inside11 mm
Groove Diameter Outside17 mm
Groove Width3 mm
Article GroupAP
Material Information for the product(s) on this page
WU9E1
WU9E1 Engineering Data Sheet_Ed1_rev0
Material:
WU9E1
Maximum Temperature:
80
Color:
Grey
Hardness unit:
Shore A
Maximum Hardness:
91
Minimum Hardness:
91
Hardness Tolerance:
+/- 2
Shore A Hardness:
91+/- 2
Material Code Class:
Thermoplastic
Material Type:
PUR
Gravity Tolerance:
+/-0.02
Gravity Unit:
g/cm³
Minimum Temperature:
-40
Specific Gravity:
1.14