APDS00500-WU9E1

Please login to see the prices

Single acting piston seal with U-shaped cross-section. For double acting pistons, two seals are used ”back to back”. Same design as APDE-type, but lower interference of the dynamic lip for reduced friction and break-off pressure. Recommended for return spring cylinders. Note: good guiding system required. Suitable for cylinders with pneumatic cushioning.

Pneumatic -Piston Seal-:

TSS Article Number (3 to 9)DS00500

Signature StandardAPDS00500-WU9E1

Type of Article0

Quality (10th Digit)-

Root Groove Inside Diameter42 mm

Root Groove Outside Diameter50 mm

Compound codeWU9E1

Root Groove Width3.50 mm

Groove Diameter Inside42 mm

Groove Diameter Outside50 mm

Groove Width3.50 mm

Article GroupAP

Material Information for the product(s) on this page

WU9E1

WU9E1 Engineering Data Sheet_Ed1_rev0

Material:

WU9E1

Maximum Temperature:

80

Color:

Grey

Hardness unit:

Shore A

Maximum Hardness:

91

Minimum Hardness:

91

Hardness Tolerance:

+/- 2

Shore A Hardness:

91+/- 2

Material Code Class:

Thermoplastic

Material Type:

PUR

Gravity Tolerance:

+/-0.02

Gravity Unit:

g/cm³

Minimum Temperature:

-40

Specific Gravity:

1.14