English
Type AWBB - AWBB00160-WU9E1
SAP Article number: 200000130501
Wiper specially designed for guide units with linear ball bearings. Wiper lip with minimal pre-load to avoid negative influences on the sliding behavior of the guide unit. The outer diameter is designed for fixing by a standard circlip retainer groove. The installation dimensions correspond to the housing diameter of the ball bearing.
Pneumatic -Rod Seal:
SAP Article number200000130501
TSS Article Number (3 to 9)BB00160
Signature StandardAWBB00160-WU9E1
Quality (10th Digit)-
Compound codeWU9E1
Groove Diameter Inside16 mm
Groove Diameter Outside24 mm
Groove Width3 mm
Article GroupAW
Material Information for the product(s) on this page
WU9E1
WU9E1 Engineering Data Sheet_Ed1_rev0
Material:
WU9E1
Maximum Temperature:
80
Color:
Grey
Hardness unit:
Shore A
Maximum Hardness:
91
Minimum Hardness:
91
Hardness Tolerance:
+/- 2
Shore A Hardness:
91+/- 2
Material Code Class:
Thermoplastic
Material Type:
PUR
Gravity Tolerance:
+/-0.02
Gravity Unit:
g/cm³
Minimum Temperature:
-40
Specific Gravity:
1.14