AWBB00400TWU9E1

Please login to see the prices

Wiper specially designed for guide units with linear ball bearings. Wiper lip with minimal pre-load to avoid negative influences on the sliding behavior of the guide unit. The outer diameter is designed for fixing by a standard circlip retainer groove. The installation dimensions correspond to the housing diameter of the ball bearing.

Pneumatic -Rod Seal:

TSS Article Number (3 to 9)BB00400

Signature StandardAWBB00400TWU9E1

Type of Article0

Quality (10th Digit)T

Root Groove Inside Diameter40 mm

Root Groove Outside Diameter52 mm

Compound codeWU9E1

Root Groove Width3 mm

Groove Diameter Inside40 mm

Groove Diameter Outside52 mm

Groove Width3 mm

Article GroupAW

Material Information for the product(s) on this page

WU9E1

WU9E1 Engineering Data Sheet_Ed1_rev0

Material:

WU9E1

Maximum Temperature:

80

Color:

Grey

Hardness unit:

Shore A

Maximum Hardness:

91

Minimum Hardness:

91

Hardness Tolerance:

+/- 2

Shore A Hardness:

91+/- 2

Material Code Class:

Thermoplastic

Material Type:

PUR

Gravity Tolerance:

+/-0.02

Gravity Unit:

g/cm³

Minimum Temperature:

-40

Specific Gravity:

1.14