English
Type BC / concave, cut - BC14H00095PT004
SAP Article number: 200000009168
Type BC Back-up Rings have a concave cross section and are made from PTFE materials. The cut angle is either 30˚ or 45˚.The large contact surface protects the O-Ring against deformation in case of high pulsating pressures. Preferred for installations in a closed groove where uncut Back-up Rings are not suitable.
BU Concave cut ID:
SAP Article number200000009168
Signature StandardBC14H00095PT004
Article Code with 6 charH00095
Ring Diameter Outside12.40 mm
Compound codePT004
Ring Diameter Inside9.50 mm
Article GroupBC
Location Mark14
Ring Thickness1.45 mm
Ring Width1.40 mm
Material Information for the product(s) on this page
PT004
Shore D Hardness:
50+/- 5
Hardness Tolerance:
+/- 5
Hardness unit:
Shore D
Specific Gravity:
2.16
Material Code Class:
Thermoplastic
Minimum Temperature:
-200
Material:
PT004
Minimum Hardness:
50
Material Type:
PTFE
Maximum Temperature:
260
Gravity Tolerance:
+/-0.02
Color:
White
Gravity Unit:
g/cm³
Maximum Hardness:
50