English
Type BC / concave, cut - BC14H00251PT004
SAP Article number: 200000004634
Type BC Back-up Rings have a concave cross section and are made from PTFE materials. The cut angle is either 30˚ or 45˚.The large contact surface protects the O-Ring against deformation in case of high pulsating pressures. Preferred for installations in a closed groove where uncut Back-up Rings are not suitable.
BU Concave cut ID:
SAP Article number200000004634
Signature StandardBC14H00251PT004
Article Code with 6 charH00251
Ring Diameter Outside28 mm
Compound codePT004
Ring Diameter Inside25.10 mm
Article GroupBC
Location Mark14
Ring Thickness1.45 mm
Ring Width1.40 mm
Material Information for the product(s) on this page
PT004
Shore D Hardness:
50+/- 5
Hardness Tolerance:
+/- 5
Hardness unit:
Shore D
Specific Gravity:
2.16
Material Code Class:
Thermoplastic
Minimum Temperature:
-200
Material:
PT004
Minimum Hardness:
50
Material Type:
PTFE
Maximum Temperature:
260
Gravity Tolerance:
+/-0.02
Color:
White
Gravity Unit:
g/cm³
Maximum Hardness:
50