English
Type BP Back-up Rings have a rectangular cross section and are made from PTFE materials. The cut angle is either 30˚ or 45˚. It consists of standard two spiral windings which are cut at the ends at an angle. It can be used in static or dynamic applications with reciprocating movements possible. Preferred for installations in closed grooves where uncut Back-up Rings are not suitable. It can compensate large temperature changes and tolerances through a screw-like elongation and contraction.
BU Rectangular spiral:
TSS Article Number (3 to 9)51I1048
Signature StandardBP51I1048-PTGC8
Type of Article0
Quality (10th Digit)-
Root Ring Inside Diameter104.8 mm
Compound codePTGC8
Ring Diameter Inside104.8 mm
Root Ring Width5.1 mm
Article GroupBP
Ring Thickness1 mm
Ring Width5.1 mm
Root Ring Thickness1 mm
Material Information for the product(s) on this page
PTGC8
Material:
PTGC8
Minimum Temperature:
-200
Maximum Temperature:
260
Material Code Class:
Thermoplastic
Hardness Tolerance:
+/- 3
Gravity Tolerance:
+/-0.04
Hardness unit:
Shore D
Gravity Unit:
g/cm³
Specific Gravity:
2.23
Minimum Hardness:
65
Material Type:
PTFE
Maximum Hardness:
65
Shore D Hardness:
65+/- 3
Color:
White