English
Turcite® Slydring® (Custom) - GPZS991300T54
Turcite® Slydring® prevents metal-to-metal contact between piston / rod and bore / gland, absorbing transverse loads. Turcite® material gives good load capacity with low friction and stick‑slip-free operation. The Slydring® protects critical sealing lips from contamination and dieseling effects. Cost-effective, it allows designers freedom in hardware material selection. Higher static loads are permissible. This is a Custom Article Number with a Customer Specific Design.
Guide/Slydring®Piston mm:
Ring Diameter Outside130 mm
Ring Diameter Inside0 mm
Signature StandardGPZS991300T54
Type of Article1
Article Code with 6 char991300
Root Groove Inside Diameter0 mm
Root Groove Outside Diameter130 mm
Root Groove Thickness4 mm
Root Groove Length385 mm
Root Ring Inside Diameter0 mm
Compound codeT54
Root Groove Width9.50 mm
Groove Length385 mm
Groove Diameter Outside130 mm
Groove Diameter Inside0 mm
Groove Thickness4 mm
Groove Width9.50 mm
Root Ring Width9.50 mm
Legacy ID from KOM2GPZS991300T54
Root Ring Outside Diameter130 mm
Ring Length385 mm
Root Ring Length385 mm
Ring Thickness4 mm
Ring Width9.50 mm
Article GroupGP
Location MarkZS
Root Ring Thickness4 mm
Material Information for the product(s) on this page
T54
Specific Gravity:
2.27
Color:
Grey to Blue
Material:
T54
Gravity Tolerance:
+0.04/-0.03
Maximum Temperature:
260
Gravity Unit:
g/cm³
Minimum Temperature:
-200
Material Code Class:
Thermoplastic
Material Type:
PTFE
Ball Hardness:
35