English
Turcite® Slydring® - GR6500180-T59
SAP Article number: 200000063088
Turcite® Slydring® prevents metal-to-metal contact between piston / rod and bore / gland, absorbing transverse loads. Turcite® material gives good load capacity with low friction and stick-slip-free operation. The Slydring® protects critical sealing lips from contamination and dieseling effects. Cost-effective, it allows designers freedom in hardware material selection. Higher static loads are permissible.
Guide/Slydring®/Rod mm:
SAP Article number200000063088
Ring Diameter Outside0 mm
Ring Diameter Inside0 mm
TSS Article Number (3 to 9)6500180
Signature StandardGR6500180-T59
Quality (10th Digit)-
Compound codeT59
Groove Length63 mm
Groove Diameter Outside0 mm
Groove Diameter Inside18 mm
Groove Thickness5.60 mm
Legacy ID from KOM2GR6500180-T59
Groove Width2.50 mm
Ring Length63 mm
Ring Thickness2.50 mm
Ring Width5.50 mm
Article GroupGR
Material Information for the product(s) on this page
T59
Maximum Temperature:
260
Gravity Tolerance:
+0.04/-0.03
Minimum Temperature:
-200
Material Code Class:
Thermoplastic
Ball Hardness:
27
Gravity Unit:
g/cm³
Specific Gravity:
2.01
Material:
T59
Material Type:
PTFE
Color:
Grey