English
Turcite® Slydring® - GR6900500-MF4
SAP Article number: 200000063109
Turcite® Slydring® prevents metal-to-metal contact between piston / rod and bore / gland, absorbing transverse loads. Turcite® material gives good load capacity with low friction and stick-slip-free operation. The Slydring® protects critical sealing lips from contamination and dieseling effects. Cost-effective, it allows designers freedom in hardware material selection. Higher static loads are permissible.
Guide/Slydring®/Rod mm:
SAP Article number200000063109
Ring Diameter Outside0 mm
Ring Diameter Inside0 mm
TSS Article Number (3 to 9)6900500
Signature StandardGR6900500-MF4
Quality (10th Digit)-
Compound codeMF4
Groove Length0 mm
Groove Diameter Outside0 mm
Groove Diameter Inside50 mm
Groove Thickness9.70 mm
Legacy ID from KOM2GR6900500-MF4
Groove Width2.50 mm
Ring Length162.50 mm
Ring Thickness2.50 mm
Ring Width9.60 mm
Article GroupGR
Material Information for the product(s) on this page
MF4
Material:
MF4
Ball Hardness:
27
Gravity Unit:
g/cm³
Specific Gravity:
2.07
Material Code Class:
Thermoplastic
Color:
Grey
Gravity Tolerance:
+/-0.03
Maximum Temperature:
260
Material Type:
PTFE
Minimum Temperature:
-200