English
Turcite® Slydring® - GR7300500-T47
SAP Article number: 200000063118
Turcite® Slydring® prevents metal-to-metal contact between piston / rod and bore / gland, absorbing transverse loads. Turcite® material gives good load capacity with low friction and stick-slip-free operation. The Slydring® protects critical sealing lips from contamination and dieseling effects. Cost-effective, it allows designers freedom in hardware material selection. Higher static loads are permissible.
Guide/Slydring®/Rod mm:
SAP Article number200000063118
Ring Diameter Outside0 mm
Ring Diameter Inside0 mm
TSS Article Number (3 to 9)7300500
Signature StandardGR7300500-T47
Quality (10th Digit)-
Compound codeT47
Groove Diameter Outside50 mm
Groove Diameter Inside50 mm
Groove Thickness2.50 mm
Legacy ID from KOM2GR7300500-T47
Groove Width15 mm
Ring Length162.50 mm
Ring Thickness2.50 mm
Ring Width14.90 mm
Article GroupGR
Material Information for the product(s) on this page
T47
Ball Hardness:
29
Minimum Temperature:
-200
Material Type:
PTFE
Specific Gravity:
3.03
Maximum Temperature:
260
Gravity Unit:
g/cm³
Material Code Class:
Thermoplastic
Gravity Tolerance:
+/-0.07
Color:
Greyish to Dark Brown
Material:
T47