English
HiMod® Slydring® prevents metal-to-metal contact between piston / rod and bore / gland, absorbing transverse loads. The modified polymeric material provides an economical solution for applications with medium transverse loads, while giving good wear and compression properties. The Slydring® is easily installed by snap-fitting and offers good dry running and wiping performance. Higher static loads are permissible.
Guide/Slydring®/Rod mm:
TSS Article Number (3 to 9)N1D0500
Signature StandardGRN1D0500-HM061
Type of Article0
Quality (10th Digit)-
Root Groove Inside Diameter50 mm
Root Groove Thickness9.7 mm
Compound codeHM061
Root Groove Width3 mm
Groove Length0 mm
Groove Diameter Outside0 mm
Groove Diameter Inside50 mm
Groove Thickness9.7 mm
Groove Width3 mm
Article GroupGR
Material Information for the product(s) on this page
HM061
HM061 Material Specification_rev5
Gravity Tolerance:
+/-0.03
Minimum Temperature:
-40
Gravity Unit:
g/cm³
Specific Gravity:
1.53
Color:
Black
Material Code Class:
Thermoplastic
Maximum Temperature:
110
Material:
HM061
Material Type:
POM