O-Rings - OR5007500-E7

O-Rings offer an efficient and economical sealing element for a wide range of static or dynamic applications and can be used to seal practically all liquid and gaseous media.

Temporarily out of stock

Institute Approvals:

FDA 1
yes  

Material Properties:

Maximum Operating Temperature
150.0  °C
Tensile Strength
10.0  MPa
Elongation at break
125.0  %
Minimum Operating Temperature
-45.0  °C
Hardness Nominal
70.0  
Hardness Tolerance
+/- 5  
Hardness Unit
Shore A  
Color
Black  

Seal dimensions:

Inside diameter d1
75.0  mm
Cross section d2
5.0  mm
installation drawing table

Material Information for the product(s) on this page OR5007500-E7

E7

Colour
black
Basic Material
EPDM
Commercial Description
A 70 durometer EPDM. EPDM shows good heat, ozone, and ageing resistance. In addition it also exhibits high levels of elasticity, good low temperature behaviour, as well as good insulating properties. The operating temperatures of applications for EPDM range between -45°C and +130°C. EPDM can often be found in applications with brake fluids (based on glycol) and hot water.