O-Rings - ORAR00037-V7

O-Rings offer an efficient and economical sealing element for a wide range of static or dynamic applications and can be used to seal practically all liquid and gaseous media.

Availability: In Stock

€ 29,60
Price (per piece)
10-24 € 2,96
25-49 € 2,47
50-99 € 2,02
100-249 € 1,59
250-499 € 1,43
500-999 € 1,36
1000-2499 € 1,29
2500-4999 € 1,23
5000+ € 1,17

Material Properties:

Maximum Operating Temperature
200.0  °C
Tensile Strength
10.0  MPa
Elongation at break
125.0  %
Minimum Operating Temperature
-20.0  °C
Hardness Nominal
70.0  
Hardness Tolerance
+/- 5  
Hardness Unit
Shore A  
Color
Green  

Quality & Norms:

Ident-No. ISO 3601-1 AS 568
037  
Reference No. AS 568 C / BS 1806
yes  

Seal dimensions:

Inside diameter d1
63.22  mm
Inside diameter tolerance ±
0.57  mm
Inside diameter d1 inch
2.489  in
Cross section d2
1.78  mm
Cross section tolerance ±
0.08  mm
Cross section d2 inch
0.07  in
installation drawing table

Material Information for the product(s) on this page ORAR00037-V7

V7

Material Data Sheet (PDF) Only available for the registered users.
Colour
green
Basic Material
FKM
Commercial Description
A 70 durometer FKM. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures. Used as an energizer in T46V and M12V