O-Rings - ORAR00045-V7

O-Rings offer an efficient and economical sealing element for a wide range of static or dynamic applications and can be used to seal practically all liquid and gaseous media.

Availability: In Stock

Price (per piece)
4-24 € 5,08
25-49 € 4,38
50-99 € 3,32
100-249 € 2,92
250+ € 2,63

Material Properties:

Maximum Operating Temperature
200.0  °C
Tensile Strength
10.0  MPa
Elongation at break
125.0  %
Minimum Operating Temperature
-20.0  °C
Hardness Nominal
Hardness Tolerance
+/- 5  
Hardness Unit
Shore A  

Quality & Norms:

Ident-No. ISO 3601-1 AS 568
Reference No. AS 568 C / BS 1806

Seal dimensions:

Inside diameter d1
101.32  mm
Inside diameter tolerance ±
0.83  mm
Inside diameter d1 inch
3.989  in
Cross section d2
1.78  mm
Cross section tolerance ±
0.08  mm
Cross section d2 inch
0.07  in
installation drawing table

Material Information for the product(s) on this page ORAR00045-V7


Basic Material
Commercial Description
A 70 durometer FKM. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures. Used as an energizer in T46V and M12V