O-Rings - ORAR00110-V7

O-Rings offer an efficient and economical sealing element for a wide range of static or dynamic applications and can be used to seal practically all liquid and gaseous media.

Availability: In Stock

€ 28,50
Price (per piece)
50-99 € 0,57
100-249 € 0,50
250-499 € 0,43
500-999 € 0,38
1000-2499 € 0,34
2500-4999 € 0,32
5000+ € 0,30

Material Properties:

Maximum Operating Temperature
200.0  °C
Tensile Strength
10.0  MPa
Elongation at break
125.0  %
Minimum Operating Temperature
-20.0  °C
Hardness Nominal
70.0  
Hardness Tolerance
+/- 5  
Hardness Unit
Shore A  
Color
Green  

Quality & Norms:

Ident-No. ISO 3601-1 AS 568
110  
Reference No. AS 568 C / BS 1806
yes  

Seal dimensions:

Inside diameter d1
9.19  mm
Inside diameter tolerance ±
0.18  mm
Inside diameter d1 inch
0.362  in
Cross section d2
2.62  mm
Cross section tolerance ±
0.09  mm
Cross section d2 inch
0.103  in
installation drawing table

Material Information for the product(s) on this page ORAR00110-V7

V7

Material Data Sheet (PDF) Only available for the registered users.
Colour
green
Basic Material
FKM
Commercial Description
A 70 durometer FKM. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures. Used as an energizer in T46V and M12V