O-Rings - ORAR00142-E7
O-Rings offer an efficient and economical sealing element for a wide range of static or dynamic applications and can be used to seal practically all liquid and gaseous media.
Availability: In Stock
€ 590,00
Price (per piece)
| 1000-2499 | € 0,59 |
|---|---|
| 2500-4999 | € 0,55 |
| 5000-9999 | € 0,49 |
| 10000+ | € 0,44 |
Installation & Handling
MaterialsInstitute Approvals:
FDA 1
yes
Material Properties:
Maximum Operating Temperature
140.0
°C
Tensile Strength
10.0
MPa
Elongation at break
100.0
%
Minimum Operating Temperature
-45.0
°C
Hardness Nominal
70.0
Hardness Tolerance
+/- 5
Hardness Unit
Shore A
Color
Black
Quality & Norms:
Ident-No. ISO 3601-1 AS 568
142
Reference No. AS 568 C / BS 1806
yes
Seal dimensions:
Inside diameter d1
59.99
mm
Inside diameter tolerance ±
0.55
mm
Inside diameter d1 inch
2.362
in
Cross section d2
2.62
mm
Cross section tolerance ±
0.09
mm
Cross section d2 inch
0.103
in
Material Information for the product(s) on this page ORAR00142-E7
E7
Material Data Sheet (PDF)
Only available for the registered users.
Colour
black
Basic Material
EPDM
Commercial Description
A 70 durometer EPDM. EPDM shows good heat, ozone, and ageing resistance. In addition it also exhibits high levels of elasticity, good low temperature behaviour, as well as good insulating properties. The operating temperatures of applications for EPDM range between -45°C and +130°C. EPDM can often be found in applications with brake fluids (based on glycol) and hot water.