O-Rings - ORAR00160-V8
O-Rings offer an efficient and economical sealing element for a wide range of static or dynamic applications and can be used to seal practically all liquid and gaseous media.
Availability: In Stock
€ 433,00
Price (per piece)
| 100-249 | € 4,33 |
|---|---|
| 250-499 | € 3,92 |
| 500+ | € 3,72 |
Installation & Handling
MaterialsMaterial Properties:
Maximum Operating Temperature
200.0
°C
Tensile Strength
10.0
MPa
Elongation at break
120.0
%
Minimum Operating Temperature
-20.0
°C
Hardness Nominal
80.0
Hardness Tolerance
+/- 5
Hardness Unit
Shore A
Color
Green
Quality & Norms:
Ident-No. ISO 3601-1 AS 568
160
Reference No. AS 568 C / BS 1806
yes
Seal dimensions:
Inside diameter d1
133.02
mm
Inside diameter tolerance ±
1.05
mm
Inside diameter d1 inch
5.237
in
Cross section d2
2.62
mm
Cross section tolerance ±
0.09
mm
Cross section d2 inch
0.103
in
Material Information for the product(s) on this page ORAR00160-V8
V8
Material Data Sheet (PDF)
Only available for the registered users.
Colour
green
Basic Material
FKM
Commercial Description
An 80 durometer FKM. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures.