English
FEP Encapsulated O-Rings combine the resilience and sealing force of an elastomer with the chemical resistance of PTFE. They consist of an elastomeric core of silicone or FKM with a seamless, thin encapsulation of FEP. The required elasticity, pretension and dimensional stability is provided by the elastomer core, while the seamless FEP encapsulation ensures reliable sealing and high resistance to aggressive media. FEP Encapsulated O-Rings are primarily used in low pressure static or slow moving dynamic applications. This seal type is recommended for non-abrasive contact surfaces and non-abrasive media only. Preconditions for the use of FEP Encapsulated O-Rings are low press-in assembly forces and limited O-Ring elongation.
O-Ring/FEP/PFA enapsulat:
Ring Diameter Inside960 mm
TSS Article Number (3 to 9)6096000
Signature StandardOF6096000-SZ00G
Type of Article0
Root Ring Inside Diameter960 mm
Compound codeSZ00G
QCC for O-rings-
Ring Width6 mm
Root Ring Width6 mm
Article GroupOF
Material Information for the product(s) on this page
SZ00G
Material:
SZ00G
Color:
Red
Material Type:
FEP/VMQ
Minimum Hardness:
75
Maximum Hardness:
75
Hardness Tolerance:
+/- 5
Material Code Class:
Material Combination
Maximum Temperature:
175
Gravity Tolerance:
+/-0.03
Minimum Temperature:
-50
Specific Gravity:
1.22
Gravity Unit:
g/cm³
Hardness unit:
Shore A
Shore A Hardness:
75+/- 5