Turcon® AQ-Seal®

A double-acting O-Ring energized seal, the Turcon® AQ Seal® is suitable for sealing between two media such as fluid and gas. It consists of a Turcon® ring and an X-ring or Quad-Ring® inset into the dynamic sealing face. It has excellent sliding properties with no stick-slip effect and can be installed into small spaces.

Seal Capabilities

  • Size Range: 16 mm to 250 mm
  • Temperature: -30 °C to 200 °C
  • Pressure (max): 50 MPa
  • Speed (max) 2 m/s

Material Information for the product(s) on this page 


greyish to dark brown
Basic Material
Virgin PTFE compounded with Turcon® and bronze
Commercial Description
Turcon® T46 is a blend of PTFE, bronze, and a proprietary Turcon® filler and is backed by years of time-tested performance and offers a balance of performance and cost. This material has a high extrusion resistance and has very good wear properties. For medium to heavy applications with reciprocating movements in mineral oils and other media with good lubrication. Used in article numbers ending in T46N and T46V.


Basic Material
Commercial Description
A 70 durometer, NBR elastomer. The properties of the nitrile rubber depend mainly on the ACN content which ranges between 18 % and 50 %. In general it has good mechanical properties with an operating temperature range of between -30 °C and +100 °C. NBR is mostly used with mineral based oils and greases and is a good choice for standard applications. Used also as an energizer in T46N, M12N, Z20N, and Z52N.
Product No. Material Bore Diameter, DN H9 (mm) Groove Diameter, d1 h9 (mm) Groove Width, L1 +0.2 (mm) Price
(per piece)