Turcon® AQ-Seal® 5 - PQ0100400-T46V

Double-acting, rubber-energized plastic faced seal with a rubber sealing insert. Includes two O-Rings and a Quad-Ring®.

Temporarily out of stock

Installation Dimensions:

Bore Diameter, DN H9
40.0  mm
Groove Diameter, d1 h9
30.0  mm
Groove Width, L1 +0.2
6.3  mm

O-Ring:

O-Ring Dimensions
29.82 x 2.62  mm
O-Ring TSS Part No.
ORAR00123  

QUAD-RING®:

QUAD-RING® TSS Part No.
QRAR04028  
QUAD-RING® Dimensions
34.65 x 1.78  mm

Quality & Norms:

Correspond to recommendation of ISO 3320
yes  

Seal Capabilities:

Min. Temperature
-10.0  °C
Max. Temperature
200.0  °C
Speed max.
3.0  m/s
Pressure max.
50.0  MPa
installation drawing table

Material Information for the product(s) on this page PQ0100400-T46V

T46

Material Data Sheet (PDF) Only available for the registered users.
Colour
greyish to dark brown
Basic Material
PTFE
Filler
Virgin PTFE compounded with Turcon® and bronze
Commercial Description
Turcon® T46 is a blend of PTFE, bronze, and a proprietary Turcon® filler and is backed by years of time-tested performance and offers a balance of performance and cost. This material has a high extrusion resistance and has very good wear properties. For medium to heavy applications with reciprocating movements in mineral oils and other media with good lubrication. Used in article numbers ending in T46N and T46V.

V7

Material Data Sheet (PDF) Only available for the registered users.
Colour
green
Basic Material
FKM
Commercial Description
A 70 durometer FKM. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures. Used as an energizer in T46V and M12V

V7002

Material Data Sheet (PDF) Only available for the registered users.
Colour
black
Basic Material
FKM
Hardness
70 (Shore A)
Commercial Description
FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and aging. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures.