Turcon® AQ-Seal® 5 - PQ0200850-M12V

Double-acting, rubber-energized plastic faced seal with a rubber sealing insert. Includes two O-Rings and a Quad-Ring®.

Availability: In Stock

Price (per piece)
1-9 € 57,35
10-24 € 47,06
25-49 € 43,56
50-99 € 39,81
100-249 € 34,43
250+ € 31,26

Installation Dimensions:

Bore Diameter, DN H9
85.0  mm
Groove Diameter, d1 h9
72.0  mm
Groove Width, L1 +0.2
8.3  mm

O-Ring:

O-Ring Dimensions
69.44 x 3.53  mm
O-Ring TSS Part No.
ORAR00232  

QUAD-RING®:

QUAD-RING® TSS Part No.
QRAR04151  
QUAD-RING® Dimensions
75.87 x 2.62  mm

Seal Capabilities:

Min. Temperature
-10.0  °C
Max. Temperature
200.0  °C
Speed max.
3.0  m/s
Pressure max.
50.0  MPa
installation drawing table

Material Information for the product(s) on this page PQ0200850-M12V

M12

Colour
dark grey
Basic Material
PTFE
Filler
Virgin PTFE compounded with Turcon®, mineral fibre and additives
Commercial Description
Turcon® M12 is a modern compound and the new standard industrial material. A development of thorough benchmarking and performance testing, Turcon® M12 offers low friction, high wear resistance and costs on par with standard bronze-filled compounds. This material is designed to be the first choice for seals used with linear motion, replacing standard (medium-filled) industrial bronze-filled compounds. Used in article numbers ending in M12N and M12V.

V7

Colour
green
Basic Material
FKM
Commercial Description
A 70 durometer FKM. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures. Used as an energizer in T46V and M12V

V7002

Colour
black
Basic Material
FKM
Hardness
70 (Shore A)
Commercial Description
FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and aging. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures.