Turcon® AQ-Seal® 5 - PQ0201150-T46N

Double-acting, rubber-energized plastic faced seal with a rubber sealing insert. Includes two O-Rings and a Quad-Ring®.

Availability: In Stock

€ 47,52
Price (per piece)
1-9 € 47,52
10-24 € 39,33
25-49 € 36,48
50-99 € 33,53
100-249 € 28,91
250+ € 26,29

Installation Dimensions:

Bore Diameter, DN H9
115.0  mm
Groove Diameter, d1 h9
102.0  mm
Groove Width, L1 +0.2
8.3  mm

O-Ring:

O-Ring Dimensions
101.19 x 3.53  mm
O-Ring TSS Part No.
ORAR00242  

QUAD-RING®:

QUAD-RING® TSS Part No.
QRAR04156  
QUAD-RING® Dimensions
107.62 x 2.62  mm

Seal Capabilities:

Min. Temperature
-30.0  °C
Max. Temperature
100.0  °C
Speed max.
3.0  m/s
Pressure max.
50.0  MPa
installation drawing table

Material Information for the product(s) on this page PQ0201150-T46N

N7

Material Data Sheet (PDF) Only available for the registered users.
Colour
black
Basic Material
NBR
Commercial Description
A 70 durometer, NBR elastomer. The properties of the nitrile rubber depend mainly on the ACN content which ranges between 18 % and 50 %. In general it has good mechanical properties with an operating temperature range of between -30 °C and +100 °C. NBR is mostly used with mineral based oils and greases and is a good choice for standard applications. Used also as an energizer in T46N, M12N, Z20N, and Z52N.

N7004

Material Data Sheet (PDF) Only available for the registered users.
Colour
black
Basic Material
NBR
Hardness
70 (Shore A)
Commercial Description
A 70 durometer, NBR elastomer. The properties of the nitrile rubber depend mainly on the ACN content which ranges between 18 % and 50 %. In general it has good mechanical properties with an operating temperature range of between -30 °C and +100 °C. NBR is mostly used with mineral based oils and greases and is a good choice for standard applications.

T46

Material Data Sheet (PDF) Only available for the registered users.
Colour
greyish to dark brown
Basic Material
PTFE
Filler
Virgin PTFE compounded with Turcon® and bronze
Commercial Description
Turcon® T46 is a blend of PTFE, bronze, and a proprietary Turcon® filler and is backed by years of time-tested performance and offers a balance of performance and cost. This material has a high extrusion resistance and has very good wear properties. For medium to heavy applications with reciprocating movements in mineral oils and other media with good lubrication. Used in article numbers ending in T46N and T46V.