English
The Polypac® PHD Seal is a heavy-duty, compact, double-acting piston seal combining a PTFE slipper ring energized by an NBR elastomer ring and reinforced with two POM backup rings. It delivers outstanding leak control, extrusion resistance, and wear protection over a wide pressure range. The elastomer energizer ensures a tight seal at low pressures, while the PTFE ring engages fully under higher pressure; backup rings guard against extrusion , providing low friction, smooth startup, and a long service life in harsh hydraulic environments
Piston/CST Seal:
TSS Article Number (3 to 9)P0P1100
Signature StandardPKP0P1100-Z2053
Type of Article0
Quality (10th Digit)-
Root Groove Thickness12.5 mm
Root Groove Inside Diameter95 mm
Root Groove Outside Diameter110 mm
Compound codeZ2053
Groove Diameter Inside95 mm
Groove Diameter Outside110 mm
Groove Width12.5 mm
Groove Thickness7.5 mm
Article GroupPK
Material Information for the product(s) on this page
N8T60
Maximum Hardness:
78
Gravity Tolerance:
+/-0.02
Material Type:
NBR
Material Code Class:
Elastomer
Hardness Tolerance:
+/- 3
Hardness unit:
Shore A
Specific Gravity:
1.23
Minimum Temperature:
-25
Shore A Hardness:
78+/- 3
Color:
Black
Gravity Unit:
g/cm³
Maximum Temperature:
100
Material:
N8T60
Minimum Hardness:
78
PO0WC
Material Type:
POM
Material:
PO0WC
Specific Gravity:
1.42
Ball Hardness:
92
Gravity Tolerance:
+/-0.02
Material Code Class:
Thermoplastic
Color:
White
Minimum Temperature:
-40
Maximum Temperature:
110
Gravity Unit:
g/cm³
Z20
Color:
Turquoise
Shore A Hardness:
93+/- 3
Specific Gravity:
1.2
Material Code Class:
Thermoplastic
Material:
Z20
Hardness Tolerance:
+/- 3
Minimum Hardness:
93
Hardness unit:
Shore A
Minimum Temperature:
-35
Material Type:
PUR
Maximum Temperature:
110
Maximum Hardness:
93
Gravity Unit:
g/cm³
Gravity Tolerance:
+/-0.02