English
Zurcon® Rimseal - Without O-Ring - PR1400200-Z54
SAP Article number: 200000064051
Zurcon® Rimseal is an elastomer energized seal element. The changes in seal position in the groove, necessary for optimum sealing function, are guaranteed by the combination of the two parts: the O-Ring and seal ring. In order to achieve a contact force increasing sealing effect with increasing pressure, the seal has a chamfer on the low pressure side which causes the seal to tilt slightly so that the seal ring is forced against the side of the groove. This creates an area of maximum pressure at the edge of the seal. The O-Ring is not included with this item.
Piston/Rimseal/Zurcon®:
SAP Article number200000064051
TSS Article Number (3 to 9)1400200
Signature StandardPR1400200-Z54
Type of Article0
Quality (10th Digit)-
Root Groove Thickness3.65 mm
Root Groove Inside Diameter12.70 mm
Root Groove Outside Diameter20 mm
Root Ring Inside Diameter16.80 mm
Root Groove Width3.20 mm
Groove Diameter Inside12.70 mm
Groove Diameter Outside20 mm
Groove Width3.20 mm
Groove Thickness3.65 mm
Ring Thickness1.55 mm
Ring Width3 mm
Legacy ID from KOM2PR1400200-Z54
Root Ring Width3 mm
Root Ring Outside Diameter19.90 mm
Article GroupPR
Root Ring Thickness1.55 mm
Seals Helsingor Material Class:
Seal Tube OD Tolerance From21.20 mm
Material Number200000064051
Seal Tube OD Tolerance Max16 mm
Seal Tube ID Tolerance Min-16 mm
Seal Tube ID Tolerance Max-1.30 mm
Seal Tube OD Tolerance To35.90 mm
Seal Tube ID Tolerance To15.50 mm
Seal Tube ID Tolerance From0.80 mm
Class Dependencies200000064051
Ring Diameter Outside19.90 mm
Compound codeZ54
Ring Diameter Inside16.80 mm
Compound Type110
Seal Tube OD Tolerance Min1.30 mm
Material Information for the product(s) on this page
Z54
Zurcon Z54 material specificationZ54 Engineering DataZ54
Color:
Turquoise
Material Type:
PUR
Minimum Temperature:
-45
Gravity Tolerance:
+/-0.02
Specific Gravity:
1.16
Gravity Unit:
g/cm³
Material:
Z54
Maximum Temperature:
110
Material Code Class:
Thermoplastic
Maximum Hardness:
58
Hardness Tolerance:
+/- 4
Hardness unit:
Shore D
Shore D Hardness:
58+/- 4
Minimum Hardness:
58