PR1400600-Z54

Zurcon® Rimseal is an elastomer energized seal element. The changes in seal position in the groove, necessary for optimum sealing function, are guaranteed by the combination of the two parts: the O-Ring and seal ring. In order to achieve a contact force increasing sealing effect with increasing pressure, the seal has a chamfer on the low pressure side which causes the seal to tilt slightly so that the seal ring is forced against the side of the groove. This creates an area of maximum pressure at the edge of the seal. The O-Ring is not included with this item.

Piston/Rimseal/Zurcon®:

TSS Article Number (3 to 9)1400600

Signature StandardPR1400600-Z54

Type of Article0

Quality (10th Digit)-

Root Groove Thickness7.55 mm

Root Groove Inside Diameter44.90 mm

Root Groove Outside Diameter60 mm

Root Ring Inside Diameter53.30 mm

Root Groove Width6.30 mm

Groove Diameter Inside44.90 mm

Groove Diameter Outside60 mm

Groove Width6.30 mm

Groove Thickness7.55 mm

Ring Thickness3.30 mm

Ring Width6 mm

Legacy ID from KOM2PR1400600-Z54

Root Ring Width6 mm

Root Ring Outside Diameter59.90 mm

Article GroupPR

Root Ring Thickness3.30 mm

Seals Helsingor Material Class:

Seal Tube OD Tolerance From61.20 mm

Material Number200000061375

Seal Tube OD Tolerance Max16 mm

Seal Tube ID Tolerance Min-16 mm

Seal Tube ID Tolerance Max-1.30 mm

Seal Tube OD Tolerance To75.90 mm

Seal Tube ID Tolerance To52 mm

Seal Tube ID Tolerance From37.30 mm

Class Dependencies200000061375

Ring Diameter Outside59.90 mm

Compound codeZ54

Ring Diameter Inside53.30 mm

Compound Type110

Seal Tube OD Tolerance Min1.30 mm

Installation Guide (PDF)

Material Information for the product(s) on this page

Z54

Zurcon Z54 material specification Z54 Engineering Data Z54

Color:

Turquoise

Material Type:

PUR

Minimum Temperature:

-45

Gravity Tolerance:

+/-0.02

Specific Gravity:

1.16

Gravity Unit:

g/cm³

Material:

Z54

Maximum Temperature:

110

Material Code Class:

Thermoplastic

Maximum Hardness:

Hardness Tolerance:

+/- 4

Hardness unit:

Shore D

Shore D Hardness:

58+/- 4

Zurcon® Rimseal - Without O-Ring - PR1400600-Z54