English
Zurcon® Rimseal - Without O-Ring - PR1401400-Z54
Zurcon® Rimseal is an elastomer energized seal element. The changes in seal position in the groove, necessary for optimum sealing function, are guaranteed by the combination of the two parts: the O-Ring and seal ring. In order to achieve a contact force increasing sealing effect with increasing pressure, the seal has a chamfer on the low pressure side which causes the seal to tilt slightly so that the seal ring is forced against the side of the groove. This creates an area of maximum pressure at the edge of the seal. The O-Ring is not included with this item.
Piston/Rimseal/Zurcon®:
TSS Article Number (3 to 9)1401400
Signature StandardPR1401400-Z54
Type of Article0
Quality (10th Digit)-
Root Groove Thickness7.55 mm
Root Groove Inside Diameter124.90 mm
Root Groove Outside Diameter140 mm
Root Ring Inside Diameter133.30 mm
Root Groove Width6.30 mm
Groove Diameter Inside124.90 mm
Groove Diameter Outside140 mm
Groove Width6.30 mm
Groove Thickness7.55 mm
Ring Thickness3.30 mm
Ring Width6 mm
Legacy ID from KOM2PR1401400-Z54
Root Ring Width6 mm
Root Ring Outside Diameter139.90 mm
Article GroupPR
Root Ring Thickness3.30 mm
Seals Helsingor Material Class:
Seal Tube OD Tolerance From141.90 mm
Material Number200000039391
Seal Tube OD Tolerance Max50 mm
Seal Tube ID Tolerance Min-50 mm
Seal Tube ID Tolerance Max-2 mm
Seal Tube OD Tolerance To189.90 mm
Seal Tube ID Tolerance To131.30 mm
Seal Tube ID Tolerance From83.30 mm
Class Dependencies200000039391
Ring Diameter Outside139.90 mm
Compound codeZ54
Ring Diameter Inside133.30 mm
Compound Type110
Seal Tube OD Tolerance Min2 mm
Material Information for the product(s) on this page
Z54
Zurcon Z54 material specificationZ54 Engineering DataZ54
Color:
Turquoise
Material Type:
PUR
Minimum Temperature:
-45
Gravity Tolerance:
+/-0.02
Specific Gravity:
1.16
Gravity Unit:
g/cm³
Material:
Z54
Maximum Temperature:
110
Material Code Class:
Thermoplastic
Maximum Hardness:
58
Hardness Tolerance:
+/- 4
Hardness unit:
Shore D
Shore D Hardness:
58+/- 4
Minimum Hardness:
58