English
Zurcon® Rimseal - Without O-Ring - PR1600360-Z53
Zurcon® Rimseal is an elastomer energized seal element. The changes in seal position in the groove, necessary for optimum sealing function, are guaranteed by the combination of the two parts: the O-Ring and seal ring. In order to achieve a contact force increasing sealing effect with increasing pressure, the seal has a chamfer on the low pressure side which causes the seal to tilt slightly so that the seal ring is forced against the side of the groove. This creates an area of maximum pressure at the edge of the seal. The O-Ring is not included with this item.
Piston/Rimseal/Zurcon®:
TSS Article Number (3 to 9)1600360
Signature StandardPR1600360-Z53
Type of Article0
Quality (10th Digit)-
Root Groove Thickness3.65 mm
Root Groove Inside Diameter28.70 mm
Root Groove Outside Diameter36 mm
Root Ring Inside Diameter32.80 mm
Root Groove Width3.20 mm
Groove Diameter Inside28.70 mm
Groove Diameter Outside36 mm
Groove Width3.20 mm
Groove Thickness3.65 mm
Ring Thickness1.55 mm
Ring Width3 mm
Legacy ID from KOM2PR1600360-Z53
Root Ring Width3 mm
Root Ring Outside Diameter35.90 mm
Article GroupPR
Root Ring Thickness1.55 mm
Seals Helsingor Material Class:
Seal Tube OD Tolerance From37.20 mm
Material Number200000064062
Seal Tube OD Tolerance Max16 mm
Seal Tube ID Tolerance Min-16 mm
Seal Tube ID Tolerance Max-1.30 mm
Seal Tube OD Tolerance To51.90 mm
Seal Tube ID Tolerance To31.50 mm
Seal Tube ID Tolerance From16.80 mm
Class Dependencies200000064062
Ring Diameter Outside35.90 mm
Compound codeZ53
Ring Diameter Inside32.80 mm
Compound Type110
Seal Tube OD Tolerance Min1.30 mm
Material Information for the product(s) on this page
Z53
Shore D Hardness:
70+/- 6
Hardness unit:
Shore D
Material:
Z53
Material Type:
PUR
Material Code Class:
Thermoplastic
Gravity Tolerance:
+/-0.02
Gravity Unit:
g/cm³
Minimum Temperature:
-45
Maximum Hardness:
70
Color:
Yellow to Light-Brown
Specific Gravity:
1.18
Minimum Hardness:
70
Hardness Tolerance:
+/- 6
Maximum Temperature:
110