English
The Stepseal® K, comes closest in satisfying the ideal demands of a dynamic seal. That is, no leakage under all dynamic conditions and completely leaktight when the system is static. In use for several decades, this seal remains a technically outstanding design. The single-acting sealing element is made of high-grade PTFE materials with superior sliding and wear resistance properties. A full range of sizes are offered to suit all MIL-G-5514F and Trelleborg Sealing Solutions standards using an O-Ring as the energizing element. Available in Turcon® or Zurcon® materials. The O-Ring is not included with this item.
Piston/Stepseal®/Turcon®:
TSS Article Number (3 to 9)1400500
Signature StandardPS1400500-T10
Type of Article0
Quality (10th Digit)-
Root Groove Thickness5.35 mm
Root Groove Inside Diameter39.3 mm
Root Groove Outside Diameter50 mm
Root Ring Inside Diameter45.25 mm
Root Groove Width4.2 mm
Ring Length0 mm
Groove Diameter Outside50 mm
Groove Width4.2 mm
Groove Diameter Inside39.3 mm
Groove Thickness5.35 mm
Ring Thickness2.55 mm
Legacy ID from KOM2PS1400500-T10
Root Ring Width3.93 mm
Root Ring Outside Diameter50.35 mm
Root Ring Length0 mm
Ring Width3.93 mm
Article GroupPS
Root Ring Thickness2.55 mm
Seals Helsingor Material Class:
Seal Tube OD Tolerance From51.65 mm
Material Number200000041100
Seal Tube OD Tolerance Max16 mm
Seal Tube ID Tolerance Min-16 mm
Seal Tube ID Tolerance Max-1.3 mm
Seal Tube OD Tolerance To66.35 mm
Seal Tube ID Tolerance To43.95 mm
Seal Tube ID Tolerance From29.25 mm
Class Dependencies200000041100
Ring Diameter Outside50.35 mm
Compound codeT10
Ring Diameter Inside45.25 mm
Compound Type110
Seal Tube OD Tolerance Min1.3 mm
Material Information for the product(s) on this page
T10
Material Code Class:
Thermoplastic
Gravity Unit:
g/cm³
Minimum Temperature:
-200
Gravity Tolerance:
+0.03/-0.02
Material Type:
PTFE
Maximum Temperature:
260
Material:
T10
Specific Gravity:
2.07
Color:
Black
Ball Hardness:
34