Stepseal® K - Without O-Ring - PS1401800-T46
The Stepseal® K, comes closest in satisfying the ideal demands of a dynamic seal. That is, no leakage under all dynamic conditions and completely leaktight when the system is static. In use for several decades, this seal remains a technically outstanding design. The single-acting sealing element is made of high-grade PTFE materials with superior sliding and wear resistance properties. A full range of sizes are offered to suit all MIL-G-5514F and Trelleborg Sealing Solutions standards using an O-Ring as the energizing element. Available in Turcon® or Zurcon® materials. The O-Ring is not included with this item.
Piston/Stepseal®/Turcon®:
TSS Article Number (3 to 9)1401800
Signature StandardPS1401800-T46
Type of Article0
Quality (10th Digit)-
Root Groove Thickness7.55 mm
Root Groove Inside Diameter164.90 mm
Root Groove Outside Diameter180 mm
Root Ring Inside Diameter174 mm
Root Groove Width6.30 mm
Ring Length0 mm
Groove Diameter Outside180 mm
Groove Width6.30 mm
Groove Diameter Inside164.90 mm
Groove Thickness7.55 mm
Ring Thickness3.45 mm
Legacy ID from KOM2PS1401800-T46
Root Ring Width5.90 mm
Root Ring Outside Diameter180.90 mm
Root Ring Length0 mm
Ring Width5.90 mm
Article GroupPS
Root Ring Thickness3.45 mm
Seals Helsingor Material Class:
Seal Tube OD Tolerance From183.90 mm
Material Number200000055647
Seal Tube OD Tolerance Max50 mm
Seal Tube ID Tolerance Min-50 mm
Seal Tube ID Tolerance Max-3 mm
Seal Tube OD Tolerance To230.90 mm
Seal Tube ID Tolerance To171 mm
Seal Tube ID Tolerance From124 mm
Class Dependencies200000055647
Ring Diameter Outside180.90 mm
Compound codeT46
Ring Diameter Inside174 mm
Compound Type110
Seal Tube OD Tolerance Min3 mm
Material Information for the product(s) on this page
T46
Gravity Unit:
g/cm³
Material:
T46
Material Type:
PTFE
Material Code Class:
Thermoplastic
Maximum Temperature:
260
Minimum Temperature:
-200
Ball Hardness:
29
Color:
Greyish to Dark Brown
Gravity Tolerance:
+/-0.04
Specific Gravity:
3.07