PT0000250-T40

SAP Article number: 200000041506

The Glyd Ring® T's benefits are provided by the innovative functional principle of the trapezoidal profile cross section. The sides of the seal profile taper towards the seal surface. The profile can thus retain the robust and compact form typical of piston seals without losing any of the flexibility required to achieve a pressure-related maximum compression. Available in Turcon® or Zurcon® materials. The O-Ring is not included with this item.

Piston/GlydRing®TTurcon®:

SAP Article number200000041506

TSS Article Number (3 to 9)250

Signature StandardPT0000250-T40

Type of Article0

Quality (10th Digit)-

Root Groove Thickness2.45 mm

Root Groove Inside Diameter20.10 mm

Root Groove Outside Diameter25 mm

Root Ring Inside Diameter23.15 mm

Root Groove Width2.20 mm

Groove Diameter Outside25 mm

Groove Diameter Inside20.10 mm

Groove Thickness2.45 mm

Groove Width2.20 mm

Ring Length0 mm

Ring Width2 mm

Ring Thickness1.05 mm

Legacy ID from KOM2PT0000250-T40

Root Ring Width2 mm

Root Ring Outside Diameter25.25 mm

Root Ring Length0 mm

Article GroupPT

Root Ring Thickness1.05 mm

Seals Helsingor Material Class:

Seal Tube OD Tolerance From26.55 mm

Material Number200000041506

Seal Tube OD Tolerance Max16 mm

Seal Tube ID Tolerance Min-16 mm

Seal Tube ID Tolerance Max-1.30 mm

Seal Tube OD Tolerance To41.25 mm

Seal Tube ID Tolerance To21.85 mm

Seal Tube ID Tolerance From7.15 mm

Class Dependencies200000041506

Ring Diameter Outside25.25 mm

Compound codeT40

Ring Diameter Inside23.15 mm

Compound Type110

Seal Tube OD Tolerance Min1.30 mm

Technical Details (PDF)Installation Guide (PDF)

Material Information for the product(s) on this page

T40

Material:

T40

Ball Hardness:

Minimum Temperature:

-200

Material Type:

PTFE

Specific Gravity:

2.07

Maximum Temperature:

260

Material Code Class:

Thermoplastic

Gravity Tolerance:

+/-0.03

Gravity Unit:

g/cm³

Color:

Grey

Glyd Ring® T - Without O-Ring - PT0000250-T40