English
Glyd Ring® RG23 is produced with an interference fit which together with the squeeze of the O-Ring ensures sealing effect even at low pressures. At higher system pressures, the O-Ring is energized by the fluid, pushing Glyd Ring® against the sealing face with increased force. Besides good static sealing the wide, shallow chamfers provide generous lubrication of the dynamic contact area in reciprocating applications. Available in Turcon® or Zurcon® materials. The O-Ring is not included with this item.
Rod/GlydRing®/Turcon®:
TSS Article Number (3 to 9)B301000
Signature StandardRGB301000-M12
Type of Article0
Quality (10th Digit)-
Root Groove Inside Diameter100 mm
Root Groove Thickness7.55 mm
Root Groove Outside Diameter115.1 mm
Root Ring Inside Diameter98.9 mm
Root Groove Width6.3 mm
Groove Diameter Inside100 mm
Groove Diameter Outside115.1 mm
Ring Length0 mm
Groove Width6.3 mm
Groove Thickness7.55 mm
Ring Thickness3.45 mm
Ring Width5.9 mm
Legacy ID from KOM2RGB301000-M12
Root Ring Width5.9 mm
Root Ring Outside Diameter105.8 mm
Root Ring Length0 mm
Article GroupRG
Root Ring Thickness3.45 mm
Seals Helsingor Material Class:
Seal Tube OD Tolerance From107.8 mm
Material Number200000048531
Seal Tube OD Tolerance Max50 mm
Seal Tube ID Tolerance Min-50 mm
Seal Tube ID Tolerance Max-2 mm
Seal Tube OD Tolerance To155.8 mm
Seal Tube ID Tolerance To96.9 mm
Seal Tube ID Tolerance From48.9 mm
Class Dependencies200000048531
Ring Diameter Outside105.8 mm
Compound codeM12
Ring Diameter Inside98.9 mm
Compound Type110
Seal Tube OD Tolerance Min2 mm
Material Information for the product(s) on this page
M12
Color:
Dark Grey
Material Code Class:
Thermoplastic
Material:
M12
Gravity Tolerance:
+/-0.03
Maximum Temperature:
260
Material Type:
PTFE
Minimum Temperature:
-200
Gravity Unit:
g/cm³
Ball Hardness:
34
Specific Gravity:
2.31