RGB402300-M12

Glyd Ring® RG23 is produced with an interference fit which together with the squeeze of the O-Ring ensures sealing effect even at low pressures. At higher system pressures, the O-Ring is energized by the fluid, pushing Glyd Ring® against the sealing face with increased force. Besides good static sealing the wide, shallow chamfers provide generous lubrication of the dynamic contact area in reciprocating applications. Available in Turcon® or Zurcon® materials. The O-Ring is not included with this item.

Rod/GlydRing®/Turcon®:

TSS Article Number (3 to 9)B402300

Signature StandardRGB402300-M12

Type of Article0

Quality (10th Digit)-

Root Groove Inside Diameter230 mm

Root Groove Thickness10.25 mm

Root Groove Outside Diameter250.50 mm

Root Ring Inside Diameter228.20 mm

Root Groove Width8.10 mm

Groove Diameter Inside230 mm

Groove Diameter Outside250.50 mm

Ring Length0 mm

Groove Width8.10 mm

Groove Thickness10.25 mm

Ring Thickness4.75 mm

Ring Width7.60 mm

Legacy ID from KOM2RGB402300-M12

Root Ring Width7.60 mm

Root Ring Outside Diameter237.70 mm

Root Ring Length0 mm

Article GroupRG

Root Ring Thickness4.75 mm

Seals Helsingor Material Class:

Seal Tube OD Tolerance From240.70 mm

Material Number200000041763

Seal Tube OD Tolerance Max50 mm

Seal Tube ID Tolerance Min-50 mm

Seal Tube ID Tolerance Max-3 mm

Seal Tube OD Tolerance To287.70 mm

Seal Tube ID Tolerance To225.20 mm

Seal Tube ID Tolerance From178.20 mm

Class Dependencies200000041763

Ring Diameter Outside237.70 mm

Compound codeM12

Ring Diameter Inside228.20 mm

Compound Type110

Seal Tube OD Tolerance Min3 mm

Installation Guide (PDF)

Material Information for the product(s) on this page

M12

Color:

Dark Grey

Material Code Class:

Thermoplastic

Material:

M12

Gravity Tolerance:

+/-0.03

Maximum Temperature:

260

Material Type:

PTFE

Minimum Temperature:

-200

Gravity Unit:

g/cm³

Ball Hardness:

Specific Gravity:

2.31

Glyd Ring® RG23 - Without O-Ring - RGB402300-M12