RGC301800-MF4

A double-acting seal recommended for linear applications. It is designed to pass over holes/ports in the counter surface or to slide across mating surfaces that have dimensional changes from a small diameter with sealing function over the seal to a large diameter with no sealing function or vice versa. Split hardware is required and prevents the seal from pulling out of the groove while passing over ports or variable diameter counter parts. Available in Turcon® or Zurcon® materials. The O-Ring is not included with this item.

Rod/GlydRing®/Turcon®:

TSS Article Number (3 to 9)C301800

Signature StandardRGC301800-MF4

Type of Article0

Quality (10th Digit)-

Root Groove Inside Diameter180 mm

Root Groove Thickness7.75 mm

Root Groove Outside Diameter195.50 mm

Root Ring Inside Diameter178.40 mm

Root Groove Width6.30 mm

Groove Diameter Inside180 mm

Groove Diameter Outside195.50 mm

Ring Length0 mm

Groove Width6.30 mm

Groove Thickness7.75 mm

Ring Thickness4.40 mm

Ring Width5.90 mm

Legacy ID from KOM2RGC301800-MF4

Root Ring Width5.90 mm

Root Ring Outside Diameter187.20 mm

Root Ring Length0 mm

Article GroupRG

Root Ring Thickness4.40 mm

Seals Helsingor Material Class:

Seal Tube OD Tolerance From190.20 mm

Material Number200000059464

Seal Tube OD Tolerance Max50 mm

Seal Tube ID Tolerance Min-50 mm

Seal Tube ID Tolerance Max-3 mm

Seal Tube OD Tolerance To237.20 mm

Seal Tube ID Tolerance To175.40 mm

Seal Tube ID Tolerance From128.40 mm

Class Dependencies200000059464

Ring Diameter Outside187.20 mm

Compound codeMF4

Ring Diameter Inside178.40 mm

Compound Type110

Seal Tube OD Tolerance Min3 mm

Installation Guide (PDF)

Material Information for the product(s) on this page

MF4

Material:

MF4

Ball Hardness:

Gravity Unit:

g/cm³

Specific Gravity:

2.07

Material Code Class:

Thermoplastic

Color:

Grey

Gravity Tolerance:

+/-0.03

Maximum Temperature:

260

Material Type:

PTFE

Minimum Temperature:

-200

Glyd Ring® Captive - Without O-Ring - RGC301800-MF4