Turcon® Stepseal® V - RSV200150-M12V

Single-acting, rubber-energized plastic faced seal. Includes an O-Ring.

Availability: 8-10  weeks

€ 21,88

Price (per piece)

2-9 € 10,94
10-24 € 9,08
25-49 € 8,54
50-99 € 7,56
100-249 € 6,53
250-499 € 5,82
500+ € 5,55

Installation Dimensions:

Rod Diameter, dN f8/h9
15.0  mm
Groove Diameter, D1 H9
25.7  mm
Groove Width, L1 +0.2
4.2  mm


O-Ring Size
18.66 x 3.53  mm
O-Ring TSS Article No.

Seal Capabilities:

Min. Temperature
-10  °C
Max. Temperature
200.0  °C
Speed max.
15.0  m/s
Pressure max.
50.0  MPa
installation drawing table

Material Information for the product(s) on this page RSV200150-M12V

Material Data Sheet (PDF) Only available for the registered users.
dark grey
Basic Material
Virgin PTFE compounded with Turcon®, mineral fibre and additives
Commercial Description
Turcon® M12 is a modern compound and the new standard industrial material. A development of thorough benchmarking and performance testing, Turcon® M12 offers low friction, high wear resistance and costs on par with standard bronze-filled compounds. This material is designed to be the first choice for seals used with linear motion, replacing standard (medium-filled) industrial bronze-filled compounds. Used in article numbers ending in M12N and M12V.

Material Data Sheet (PDF) Only available for the registered users.
Basic Material
Commercial Description
A 70 durometer FKM. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures. Used as an energizer in T46V and M12V