Zurcon® Rimseal

A single-acting rod seal energized by an elastomer O-Ring, the Zurcon® Rimseal provides high static and dynamic leak tightness. Acts as a suitable secondary element to ensure reliable sealing of thin oil films at low secondary pressures. Easy installation and high wear resistance.

Seal Capabilities

  • Size Range: 10 mm to 250 mm
  • Temperature: -30 °C to 100 °C
  • Pressure (max): 50 MPa
  • Speed (max) 5 m/s

Material Information for the product(s) on this page

Basic Material
58 (Shore D)
Commercial Description
A proprietary polyurethane material specially developed by Trelleborg Sealing Solutions for the manufacture of sealing elements. It offers high wear resistance, low compression set, a wide operating temperature range, and almost universal media compatibility. This material is most often used in linear and static application requiring high wear resistance and good sealability. Comes with an NBR (N7) elastomer and used in article numbers ending in Z52N.
Basic Material
Commercial Description
A 70 durometer, NBR elastomer. The properties of the nitrile rubber depend mainly on the ACN content which ranges between 18 % and 50 %. In general it has good mechanical properties with an operating temperature range of between -30 °C and +100 °C. NBR is mostly used with mineral based oils and greases and is a good choice for standard applications. Used also as an energizer in T46N, M12N, Z20N, and Z52N.
Product No. Material Rod Diameter, dN f8/h9 (mm) Groove Diameter, D1 H9 (mm) Groove Width, L1 +0,2 (mm) Price
(per piece)