TSS type TRE and Stefa type CC - TRE301300-VCV

Type TRE are seals with a completely rubber covered outer diameter and a secondary dust lip which protects the other lip against dust and other fine contaminants. This type of radial oil seal is recommended for use in polluted environments.

Availability: In Stock

Price (per piece)
1-49 € 56,57
50-99 € 42,99
100-249 € 27,15
250+ € 22,63

Installation Dimensions:

Shaft diameter, d1 h11
130.0  mm
Bore diameter, d2 H8
150.0  mm
Width, b
12.0  mm

Material Properties:

Tensile Strength
9.1  MPa
Hardness Nominal
Hardness Tolerance
+/- 5  
Hardness Unit
Shore A  

Seal Capabilities:

Min. Temperature
-30.0  °C
Max. Temperature
200.0  °C
Speed max.
30.0  m/s
Pressure max.
0.05  MPa
installation drawing table

Material Information for the product(s) on this page TRE301300-VCV


Basic Material
Commercial Description
A 75 durometer FKM with a standard steel case. Comes with a stainless steel spring. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing.  The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C.  FKM is also often used with mineral based oils and greases at high temperatures.