TSS type TRE and Stefa type CC - TRE900450-VCV

Type TRE are seals with a completely rubber covered outer diameter and a secondary dust lip which protects the other lip against dust and other fine contaminants. This type of radial oil seal is recommended for use in polluted environments.

Availability: In Stock

Price (per piece)
2-49 € 17,20
50-99 € 13,38
100-249 € 8,92
250-499 € 7,01
500+ € 5,31

Installation Dimensions:

Shaft diameter, d1 h11
45.0  mm
Bore diameter, d2 H8
75.0  mm
Width, b
10.0  mm

Material Properties:

Tensile Strength
9.1  MPa
Hardness Nominal
Hardness Tolerance
+/- 5  
Hardness Unit
Shore A  
installation drawing table

Material Information for the product(s) on this page TRE900450-VCV


Basic Material
Commercial Description
A 75 durometer FKM with a standard steel case. Comes with a stainless steel spring. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing.  The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C.  FKM is also often used with mineral based oils and greases at high temperatures.