TSS type TRE and Stefa type CC - TRE900500-VCV

Type TRE are seals with a completely rubber covered outer diameter and a secondary dust lip which protects the other lip against dust and other fine contaminants. This type of radial oil seal is recommended for use in polluted environments.

Availability: In Stock

€ 20,42
Price (per piece)
1-49 € 20,42
50-99 € 15,89
100-249 € 10,59
250-499 € 8,32
500+ € 6,31

Installation Dimensions:

Shaft diameter, d1 h11
50.0  mm
Bore diameter, d2 H8
90.0  mm
Width, b
10.0  mm

Material Properties:

Tensile Strength
9.1  MPa
Hardness Nominal
75.0  
Hardness Tolerance
+/- 5  
Hardness Unit
Shore A  
Color
Brown  
installation drawing table

Material Information for the product(s) on this page TRE900500-VCV

VCV

Colour
brown
Basic Material
FKM/metal
Commercial Description
A 75 durometer FKM with a standard steel case. Comes with a stainless steel spring. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing.  The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C.  FKM is also often used with mineral based oils and greases at high temperatures.