TSS type TRE and Stefa type CC - TREB00950-V8V

Type TRE are seals with a completely rubber covered outer diameter and a secondary dust lip which protects the other lip against dust and other fine contaminants. This type of radial oil seal is recommended for use in polluted environments.

Availability: In Stock

€ 46,75
Price (per piece)
1-49 € 46,75
50-99 € 35,96
100-249 € 23,38
250-499 € 17,98
500+ € 15,01

Installation Dimensions:

Shaft diameter, d1 h11
95.0  mm
Bore diameter, d2 H8
125.0  mm
Width, b
12.0  mm

Material Properties:

Maximum Operating Temperature
200.0  °C
Tensile Strength
8.3  MPa
Minimum Operating Temperature
-18  °C
Hardness Nominal
Hardness Tolerance
+/- 5  
Hardness Unit
Shore A  

Quality & Norms:

Correspond to the recommendation in DIN 3760
installation drawing table

Material Information for the product(s) on this page TREB00950-V8V


Basic Material
Commercial Description
An 80 durometer FKM with a standard steel case. Comes with a stainless steel spring. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing.  The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C.  FKM is also often used with mineral based oils and greases at high temperatures.