TSS type TRE and Stefa type CC - TREC00500-V8V

Type TRE are seals with a completely rubber covered outer diameter and a secondary dust lip which protects the other lip against dust and other fine contaminants. This type of radial oil seal is recommended for use in polluted environments.

Availability: In Stock

€ 34,40
Price (per piece)
2-49 € 17,20
50-99 € 13,38
100-249 € 8,92
250-499 € 7,01
500+ € 5,31

Installation Dimensions:

Shaft diameter, d1 h11
50.0  mm
Bore diameter, d2 H8
72.0  mm
Width, b
8.0  mm

Material Properties:

Maximum Operating Temperature
200.0  °C
Tensile Strength
8.3  MPa
Minimum Operating Temperature
-18  °C
Hardness Nominal
80.0  
Hardness Tolerance
+/- 5  
Hardness Unit
Shore A  
Color
Brown  

Quality & Norms:

Correspond to the recommendation in DIN 3760
yes  
installation drawing table

Material Information for the product(s) on this page TREC00500-V8V

V8V

Colour
brown
Basic Material
FKM/metal
Commercial Description
An 80 durometer FKM with a standard steel case. Comes with a stainless steel spring. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing.  The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C.  FKM is also often used with mineral based oils and greases at high temperatures.