V-Ring type S

Profile S is wide and tapered, which provides a very firm hold on the shaft. The rings are available for shaft diameters from 5 to 199 mm. The V-ring® is an all-rubber seal for rotary shafts, rotating with the shaft and sealing axially against the stationary counterface. Its light lip pressure generates low friction. It can also be used as a secondary seal to protect primary seals that do not perform well in hostile environments.

Seal Capabilities

  • Size Range: 8 mm to 199 mm
  • Temperature: -40 °C to 200 °C
  • Speed (max) 12 m/s

Material Information for the product(s) on this page

N6T50
Colour
black
Basic Material
NBR
Hardness
60 (Shore A)
Commercial Description
The properties of the nitrile rubber depend mainly on the ACN content which ranges between 18 % and 50 %. In general it has good mechanical properties with an operating temperature range of between -30 °C and +100 °C (for a short period of time up to +120 °C). NBR is mostly used with mineral based oils and greases and is a good choice for standard applications.
VDT50
Colour
black
Basic Material
FKM
Hardness
65 (Shore A)
Commercial Description
FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and aging. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures.
Product No. Material For shaft diameter, d1 (mm) Minimum, d3 (mm) Fitted width, B1 (mm) Price
(per piece)
Quantity
(pieces)
Total
Amount