English
Zurcon® Rimseal is an elastomer energized seal element. The changes in seal position in the groove, necessary for optimum sealing function, are guaranteed by the combination of the two parts: the O-Ring and seal ring. In order to achieve a contact force increasing sealing effect with increasing pressure, the seal has a chamfer on the low pressure side which causes the seal to tilt slightly so that the seal ring is forced against the side of the groove. This creates an area of maximum pressure at the edge of the seal. This version is manufactured using Injection Molding. The O-Ring is not included with this item.
Rod/Rimseal/Zurcon®:
TSS Article Number (3 to 9)B300850
Signature StandardRRB300850-Z13
Type of Article0
Quality (10th Digit)-
Root Groove Inside Diameter85 mm
Root Groove Thickness7.55 mm
Root Groove Outside Diameter100.1 mm
Compound codeZ13
Root Groove Width6.3 mm
Groove Diameter Inside85 mm
Groove Diameter Outside100.1 mm
Groove Width6.3 mm
Groove Thickness7.55 mm
Article GroupRR
Material Information for the product(s) on this page
Z13
Z13 Engineering Data Sheet_Ed1_rev0
Gravity Unit:
g/cm³
Minimum Temperature:
-30
Hardness unit:
Shore D
Shore D Hardness:
62+/- 3
Maximum Temperature:
120
Color:
Dark Grey
Material Code Class:
Thermoplastic
Hardness Tolerance:
+/- 3
Gravity Tolerance:
+/-0.02
Maximum Hardness:
62
Specific Gravity:
1.24
Minimum Hardness:
62
Material:
Z13
Material Type:
PUR