English
Zurcon® U-Cup RU6 - RU6100250-Z20
Additional to the machined seals Stepseal® 2K and Rimseal for housings ISO 7425/2 (rubber energized plastic seals) the U-Cup RU6 has been developed as an injection molded seal of polyurethane material to fit in the same ISO housings. The integrated NBR O-Ring (only available for series RU62 - RU64) improves the performance at low pressure and low temperature applications. Polyurethane (Zurcon® Z20) is a proven material for U-cups due to their good mechanical properties.
Rod/U-Cup:
TSS Article Number (3 to 9)6100250
Signature StandardRU6100250-Z20
Type of Article0
Quality (10th Digit)-
Root Groove Inside Diameter25 mm
Root Groove Thickness3.75 mm
Root Groove Outside Diameter32.50 mm
Compound codeZ20
Root Groove Width3.20 mm
Groove Diameter Inside25 mm
Groove Diameter Outside32.50 mm
Groove Width3.20 mm
Groove Thickness3.75 mm
Article GroupRU
Material Information for the product(s) on this page
Z20
Color:
Turquoise
Shore A Hardness:
93+/- 3
Specific Gravity:
1.2
Material Code Class:
Thermoplastic
Material:
Z20
Hardness Tolerance:
+/- 3
Minimum Hardness:
93
Hardness unit:
Shore A
Minimum Temperature:
-35
Material Type:
PUR
Maximum Temperature:
110
Maximum Hardness:
93
Gravity Unit:
g/cm³
Gravity Tolerance:
+/-0.02