English
Zurcon® U-Cup RU6 - RU6300630-Z20
SAP Article number: 200000165647
Additional to the machined seals Stepseal® 2K and Rimseal for housings ISO 7425/2 (rubber energized plastic seals) the U-Cup RU6 has been developed as an injection molded seal of polyurethane material to fit in the same ISO housings. The integrated NBR O-Ring (only available for series RU62 - RU64) improves the performance at low pressure and low temperature applications. Polyurethane (Zurcon® Z20) is a proven material for U-cups due to their good mechanical properties.
Rod/U-Cup:
SAP Article number200000165647
TSS Article Number (3 to 9)6300630
Signature StandardRU6300630-Z20
Quality (10th Digit)-
Compound codeZ20
Groove Diameter Inside63 mm
Groove Diameter Outside78.50 mm
Groove Width6.30 mm
Article GroupRU
Material Information for the product(s) on this page
Z20
Color:
Turquoise
Shore A Hardness:
93+/- 3
Specific Gravity:
1.2
Material Code Class:
Thermoplastic
Material:
Z20
Hardness Tolerance:
+/- 3
Minimum Hardness:
93
Hardness unit:
Shore A
Minimum Temperature:
-35
Material Type:
PUR
Maximum Temperature:
110
Maximum Hardness:
93
Gravity Unit:
g/cm³
Gravity Tolerance:
+/-0.02