English
Zurcon® U-Cup RU6 - RU6300800-Z25
Additional to the machined seals Stepseal® 2K and Rimseal for housings ISO 7425/2 (rubber energized plastic seals) the U-Cup RU6 has been developed as an injection molded seal of polyurethane material to fit in the same ISO housings. The integrated NBR O-Ring (only available for series RU62 - RU64) improves the performance at low pressure and low temperature applications. Polyurethane (Zurcon® Z20) is a proven material for U-cups due to their good mechanical properties.
Rod/U-Cup:
TSS Article Number (3 to 9)6300800
Signature StandardRU6300800-Z25
Type of Article0
Quality (10th Digit)-
Root Groove Inside Diameter80 mm
Root Groove Outside Diameter95.50 mm
Compound codeZ25
Root Groove Width6.30 mm
Groove Diameter Inside80 mm
Groove Diameter Outside95.50 mm
Groove Width6.30 mm
Article GroupRU
Material Information for the product(s) on this page
Z25
Zurcon_Z25_enZ25 Engineering Data Sheet_Ed1_rev0
Material Type:
PUR
Maximum Temperature:
130
Gravity Tolerance:
+/-0.02
Material:
Z25
Shore A Hardness:
95+/- 3
Gravity Unit:
g/cm³
Specific Gravity:
1.2
Hardness Tolerance:
+/- 3
Color:
Black
Minimum Temperature:
-35
Minimum Hardness:
95
Material Code Class:
Thermoplastic
Maximum Hardness:
95
Hardness unit:
Shore A